What causes Zhejiang Lichuang Luggage Accessories Co., Ltd. to be unable to pull out the iron pipe of the luggage pull rod and the solution. Is it just the following reasons?
1. Tear open the inner lining from inside, find the small bump in the card position, press it in, and then pull it out. Then find a way to disassemble this U-shaped structure for repair.
2. Open the inside and pull the bottom zipper of the pull rod to see if the pull rod slot cannot be pressed down. I mind if you call the manufacturer to find a nearby repair point and take it for repair.
3. Try adding some lubricating oil, which is commonly the case with pull cases
4. Pull out all the pull rods, hold them with both hands and lift the box, shaking it up and down
5.The bottom of the "L" core in the pull rod tube is worn out.
6. If the beads are stuck, just install or remove the beads.
Zhejiang Lichuang Luggage Accessories Co., Ltd. is a professional manufacturer and processor of customized luggage welded pipes, luggage iron pipes, luggage rod iron pipes, and other products. With a complete and scientific quality management system, the company has built an annual production of 30 million sets of luggage iron pipe zipper accessories in the third phase of the Xianjiang Street Fashion Luggage Headquarters Park. It has introduced leading domestic equipment such as automatic zipper sewing machines, intelligent high-frequency welding pipe machines, automatic planting and cutting machines, quality inspection equipment, and mechanical arms, and specializes in supporting the iron pipes and zippers used in luggage pull rods and boxes in the luggage park. The company mainly provides support for well-known domestic luggage production enterprises such as Hongyi Luggage, Ginza Luggage, and Yongli Luggage, and also provides support for Xinxiu Luggage. Designated accessory supplier for the Li brand.
